Installing a diskette drive – HP ProLiant ML350 G5 Server User Manual
Page 45
Advertising
Hardware options installation 45
1.
Install the full-height media device ("
Installing a half-height or full-height media device
2.
Remove the front guide screw from the full-height media device, and the silver shipping screw from
the chassis.
3.
Install the silver shipping screw into the full-height device.
Installing a diskette drive
1.
Power down the server (on page
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
Open or remove the tower bezel
" on page
o
Extend the server from the rack (on page
3.
Remove the media bay blank ("
Accessing the removable media cage
4.
Remove the access panel (on page
5.
Use a T-15 Torx screwdriver to remove the four 6-32 screws from the media bay blank.
Advertising