Expansion board options, Removing the expansion slot cover – HP ProLiant ML350 G5 Server User Manual
Page 48
Hardware options installation 48
3.
Slide the power supply into the power supply bay until the release/lock lever clicks, securing the
power supply.
4.
Using the retaining clip shipped with the server, secure the power cord to the power supply handle.
Securing the cord will ensure enough slack.
5.
Connect the power cord to the power supply.
6.
Connect the power cord to the AC power source.
7.
Be sure that the power supply and external health LEDs are illuminated green.
Expansion board options
The server supports PCI, PCI-X, and PCI Express expansion boards.
Removing the expansion slot cover
To install the component:
1.
Power down the server (on page
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
Open or remove the tower bezel
" on page
o
Extend the server from the rack (on page
3.
Remove the access panel (on page