Redundant hot-plug power supply option – HP ProLiant ML350 G5 Server User Manual
Page 46
Advertising
Hardware options installation 46
6.
Install the screws into the diskette drive, as shown.
7.
Slide the diskette drive into the diskette drive bay.
8.
Connect the data and power cables to the rear of the device.
9.
Connect the diskette drive cable to the diskette drive cable connector on the system board ("
10.
Install the access panel (on page
11.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
12.
Power up the server (on page
Redundant hot-plug power supply option
Advertising