Tower-to-rack conversion option – HP ProLiant ML350 G5 Server User Manual
Page 62
Advertising
Hardware options installation 62
Tower-to-rack conversion option
The tower-to-rack conversion kit includes all equipment required to convert the tower model server into a
rack model server and to install the server into most square- or round-hole racks.
The tower-to-rack conversion kit includes:
•
Rack rails
•
Cable management arm
•
Server rails
•
Cage nuts
•
Rack bezel
•
Cable management arm extender bracket, included with the server
In addition to the supplied items, you may need:
•
T-10 Torx screwdriver
•
T-15 Torx screwdriver
To convert a tower server to a rack server:
1.
Power down the server (on page
2.
Remove the tower bezel ("
Open or remove the tower bezel
3.
Remove the feet.
4.
Remove both tower configuration panels.
Advertising