HP Scitex FB950 Printer series - Manual (Page 26)

●
Vacuum — this option turns on the vacuum fans, and displays ▲ and ▼ arrow keys on the
control panel. Press the ▲ and ▼ arrow keys to raise or lower the fan speed for each zone
(input zone, between the pinch rollers, and print zone). Observe the media as the fan speed
changes. If the media is lifting off the belt, increase the fan speed. If the media advance seems
impeded by the vacuum, decrease the fan speed.
●
Printing Delay — press the ▲ and ▼ arrow keys on the control panel to increase or decrease
the delay (seconds per print swath). To increase throughput, decrease the delay.
4. Press Proceed to load the media, or press Cancel to discard your changes.
Media Wizard
To view or delete settings for an existing media type, press the Media Wizard key. The Media Wizard
also lets you create a media type without configuring it as the currently-loaded media.
20 Chapter 2 Printing ENWW