HP Scitex FB950 Printer series - Manual (Page 77)

Manually clean the printheads (bi-weekly)
1. Move the output-side table away from the printer.
2. From the control panel, select the following:
Tools > Maintenance > Manually Clean Printheads
This will cause the rail and output roller to raise to their highest positions and move the carriage
out over the belt.
3. Open the output-side door to access the carriage.
CAUTION: Wear protective gloves, such as latex, to protect your hands from being stained with
ink.
CAUTION: Wear safety glasses to protect your eyes from ink and head flush that may splash
into your eyes.
4. Place a piece of scrap vinyl under the carriage (see A in the photo below). You can use any media
that will protect the belt from dripping ink and/or head flush.
5. Fully saturate a lint-free cloth with head flush solution.
ENWW Manually clean the printheads (bi-weekly) 71