HP StorageWorks 2.140 Director Switch User Manual
Page 178
Advertising

Using Logs
176
Director Element Manager User Guide
— Not-operational (NOS) primitive sequence received. A NOS was
recognized.
— Primitive sequence timeout. Link reset protocol timeout occurred.
Timeout occurred for an appropriate response while in NOS receive state
and after NOS is no longer recognized.
— Invalid primitive sequence received for the current link state. Either a link
reset or a link reset response primitive sequence was recognized while
waiting for the offline sequence.
For corrective actions in response to these link incident messages, refer to the
diagnostics chapter in the HP StorageWorks Director 2/64 Service Guide for the
Director 2/64 and the HP StorageWorks Director 2/140 Service Guide for the
Director 2/140.
Advertising
This manual is related to the following products: