HP StorageWorks 2.140 Director Switch - Manual (Page 32)

Overview
30 Director Element Manager User Guide
Clear System Error Light
Click this option to turn off the amber system error LED, located below the green
power LED on the director front bezel.
Enable Unit Beaconing
Click the Enable Unit Beaconing check box to toggle unit beaconing on or off.
When the check box has a check mark, unit beaconing is on, and the amber system
error light on the director front bezel blinks to help users locate the actual unit in
an equipment room. When you click the check box to remove the check mark, unit
beaconing is disabled and the amber LED goes out. You can only enable
beaconing if there are no system errors (the system error light is off).
Properties
Click this option to display the Director Properties dialog box. This dialog box
contains the director name, description, location, and contact person configured
through the Configure Identification dialog box. Also included is other product
information, as detailed under “
Displaying Director Information ” on page 71. You
can also display this dialog box by double-clicking an area in the Hardware View,
away from a hardware component.
Close
Click this option to close the Element Manager window.
Configure Menu
Click the Configure menu to display the following options. For detailed
information on using these options, see “
Configuring the Director ” on page 115.
Identification
Click this option to display the Configure Identification dialog box. Enter the
following information in this dialog box:
■ Name—Enter a product name. Note that you can set this name as the
nickname for the director’s WWN, using the Set Name as Nickname check
box. The nickname then displays instead of the WWN in Element Manager
views.
■ Description—Enter a unique product description.