HP StorageWorks 2.140 Director Switch - Manual (Page 235)

Information and Error Messages
233 Director Element Manager User Guide
Zoning by port
number is not
supported in Open
Fabric Mode.
You cannot specify an
item for zoning by port
number if HAFM is in
Open Fabric Mode.
Either define zones by WWN
of device or change to
Homogeneous Fabric mode in
the Configure Operation Mode
dialog box of the Element
Manager.
Zoning name already
exists.
Duplicate zone names
are not allowed in the
zoning library.
Modify (to make it unique) or
delete the duplicate zone
name.
Table 9: HAFM Messages (Continued)
Message Description Action