HP StorageWorks 2.140 Director Switch - Manual (Page 203)

Optional Features
201 Director Element Manager User Guide
3. Click one of the Connection Policy options.
■ Restrict E_Ports—Choose this option if you want to restrict connections
from specific switches to switch E_Ports. Switch WWNs can be added to
the Switch Membership List to allow connection and removed from the
Membership List to prohibit connection. Devices are allowed to connect
to any F_Port.
■ Restrict F_Ports—Choose this option if you want to restrict connections
from specific devices to switch F_Ports. Device WWNs can be added to
the Switch Membership List to allow connection and removed from the
Membership List to prohibit connection. Switches are allowed to connect
to any E_Port.
■ Restrict All—Choose this option if you want to restrict connections from
specific devices to switch F_Ports and switches to switch E_Ports. Device
and switch WWNs can be added to the Switch Membership List to allow
connection and removed from the Membership List to prohibit
connection.
4. Click Activate to enable the changes and close the dialog box.
5. Edit the Switch Membership List through the Switch Binding Membership
List dialog box to add or remove switches and devices that are allowed to
connect with the switch.
Editing the Switch Membership List
1. Choose the Configure > Switch Binding > Edit Membership List from the
Element Manager window. The Switch Binding Membership List dialog box
displays, as shown in
Figure 67 .
The WWNs of devices and/or switches that can currently connect to switch
ports are listed in the Switch Membership List panel.