HP StorageWorks 2.140 Director Switch - Manual (Page 49)

Overview
47 Director Element Manager User Guide
■ Port Technology
■ Block Port
■ Enable Beaconing
■ Diagnostics
■ Channel Wrap (FICON management style only)
■ Swap Ports (FICON management style only)
■ Clear Link Incident Alert(s)
■ Reset Port
■ Port Binding
■ Clear Threshold Alert(s)
These options also display when you click a port row and choose Product > Port.
For details on these menu options, see “ Port Menu ” on page 85.
For details on navigating and monitoring using the Port List View, see “ Port List
View ” on page 90.
Node List View
To display the Node List View, click the Node List view tab. A table, as shown in
Figure 9 displays in the View panel. This table provides information about all
node attachments or N_Ports that have logged in to existing F_Ports on the
director. Only N_Ports display in the Node List View after nodes have logged in to
the fabric.
The columns that display in the table include: port number where the node is
attached, the port’s address, WWN of the attached node’s port, unit type, and
BB_Credit used by the attached node.
To display the Node Properties dialog box for a port, double-click the port row.
To display the following menu options for a port, right-click the port row:
■ Node Properties—Displays the Node Properties dialog box.
■ Port Properties—Displays the Port Properties dialog box.
■ Define Nickname—Displays the Define Nickname dialog box, where you
can define a nickname to display for the attached device instead of the
device’s eight-byte WWN.