To align the printheads, To calibrate the linefeed – HP Officejet Pro 8500 User Manual
Page 183
![background image](/manuals/398265/183/background.png)
1
Printer Information: Shows device information (such as the product model number, serial
number, and firmware version number), the number of pages printed from the trays and
duplexer, the ink level information, and the printhead health status.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only.
When you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace cartridges until
prompted to do so.
2
Test Pattern 1: If the lines are not straight and connected, align the printheads. For more
information, see
3
Test Pattern 2: If there are thin white lines across any of the colored blocks, clean the
printheads. For more information, see
4
Test Pattern 3: If there are dark lines or white gaps where the arrows are pointing,
calibrate the linefeed. For more information, see
.
To align the printheads
Whenever you replace a printhead, the device automatically aligns the printheads to
ensure the best print quality. However, if the appearance of your printed pages
indicates that the printheads are misaligned, you can start the alignment process
manually.
NOTE: Before aligning the printheads, make sure you load plain paper. For more
information, see
.
•
Control panel: Press
(Setup), select Tools, select Align Printer, and then
press OK. Press OK again when the alignment is done to continue.
•
Embedded Web server: Click the Settings tab, click Device Services in the left
pane, select Align Printer from the drop-down list in the Print Quality section,
and then click Run Diagnostic.
•
Toolbox (Windows): Click the Services tab, and then click Align Printheads and
follow the onscreen instructions.
•
HP Printer Utility (Mac OS X): Click Align from the Information and Support
panel.
To calibrate the linefeed
•
Control panel: PressSetup, select Tools, select Calibrate Linefeed, and then
press OK.
•
Embedded Web server: Click the Settings tab, click Device Services in the left
pane, select Calibrate Linefeed from the drop-down list in the Print Quality
section, and then click Run Diagnostic.
•
Toolbox (Windows): Click the Services tab, and then click Calibrate Linefeed
and follow the onscreen instructions.
•
HP Printer Utility (Mac OS X): Click Calibrate Linefeed from the Information
and Support panel.
Maintain the printheads
179