HP Designjet 5100 Printer series - Manual (Page 39)

2-15
Load and unload material
HP Designjet 5100 printer Customer Reference Guide
12 Remove the core tube from the spindle.
Removing the roll from the printer
1 Press the Load/Unload Media key on the front panel.
NOTE: If the media length tracking feature is switched on, the printer will
print how much printing material you have remaining on the roll.
2 The printing material will be removed from
the printer.
3 Turn the blue media stop by hand, until the
printing material is fully removed from
inside the printer.
4 Press the Enter key.
5 Remove the roll from the printer by pulling on the roll as indicated by the
arrows.
Take-up reel core tube (with paper)
Take-up reel spindle