HP Designjet 5100 Printer series - Manual (Page 52)

3-8
Maintain the ink system
HP Designjet 5100 printer Customer Reference Guide
11 The front panel displays:
Printhead installation
1 If the printhead is new:
„ Remove the blue protective cap by pulling down on it.
„ Remove the clear protective tape from the printhead’s nozzles by pulling
on the paper tab.
The printhead is designed to prevent you from accidentally inserting it into
the wrong position. Check that the colored label on the printhead matches
the colored label of the carriage assembly position into which the printhead
is to be inserted.
2 Insert the new printhead into the correct carriage assembly position.
3 Push down as indicated by the arrow shown below.
Blue
protective
cap