HP XP P9500 Storage - Manual (Page 35)

Operations to be performed in the next step
• Setting the operating environment for Smart Manager for Mainframe (setting environment variables
or system symbols)
Related topics
• Settings for using environment configuration commands , page 33
• Registering a user SVC using the IEASVCxx parmlib member , page 35
• Setting the operating environment for Smart Manager for Mainframe (setting environment variables
or system symbols) , page 36
• Notes on when registering a user SVC if Business Continuity Manager is installed , page 54
• KTALCSVC , page 121
Registering a user SVC using the IEASVCxx parmlib member
Statically register a user SVC by defining a user SVC number in the IEASVCxx parmlib member.
1. Choose an unused number between 200 and 255 to be assigned for the user SVC.
2. Define the following SYMDEF statement ( &YKSVCNO system symbol) in the IEASYMxx parmlib
member:
SYMDEF(&YKSVCNO='SVC-number')
For details, see the manual MVS Initialization and Tuning Reference.
3. To concatenate the load library for LPALIB HPQKLPAT to LPALST , perform either of the following:
• Define the load library for LPALIB
HPQKLPAT
in the
LPALSTxx
parmlib member. For details,
see the manual MVS Initialization and Tuning Reference.
• Use the SETPROG LPA command to dynamically concatenate the load library for LPALIB
HPQKLPAT to LPALST . For details, see the manual MVS System Commands.
4. Define the following SVCPARM statement in the IEASVCxx parmlib member:
SVCPARM SVC-number,REPLACE,TYPE(3),EPNAME(JYUASVC),APF(NO),NPRMPT(NO),AR(NO)
For details, see the manual MVS Initialization and Tuning Reference.
To enable registration, you must perform an IPL again with the CLPA parameter specified.
CAUTION:
User SVCs are shared between Smart Manager for Mainframe, and Business Continuity Manager.
Therefore, you must be careful when registering a user SVC if you install Smart Manager for Mainframe
for the first time in an environment where Business Continuity Manager is installed.
User Guide 35