HP XP P9500 Storage User Manual
Page 78
Example of adding a volume to the tiering policy group definition
The following describes how to add a volume to the tiering policy group definition.
1.
Do either of the following:
When adding a volume to the SMS storage group
#TYPE ,DEVICE,TPGID,TierLvl,Entry,Reloc
STORGRP,SG1 ,TPG1 ,2 ,HIGH
Add a volume to the SMS storage group. You do not need to modify the tiering policy inform-
ation CSV file.
When adding a volume that does not belong to the SMS storage group
Add the record of the volume to be added to the tiering policy information CSV file.
Before the change:
#TYPE ,DEVICE,TPGID,TierLvl,Entry,Reloc
STORGRP,SG1 ,TPG1 ,2 ,HIGH
After the change:
#TYPE ,DEVICE,TPGID,TierLvl,Entry,Reloc
STORGRP,SG1 ,TPG1 ,2 ,HIGH
DEVN ,1202 ,TPG1 ,2 ,HIGH
2.
Update the disk configuration definition file:
When adding a volume to the SMS storage group
Scan the SMS storage group again.
CALL KTSCAN "STEM(stem1.) MSG(msgstem.) STORGRP(SG1)";
CALL KTSTORE "STEM(stem1.) MSG(msgstem.) PREFIX(PREFIX1)";
When adding a volume that does not belong to the SMS storage group
Smart Manager for Mainframe operation
78