HP XP P9500 Storage - Manual (Page 62)

DKC
SN:14001,Model:VSP,Microcode:xxxxxxxx,IFType:1414
Pool
ID, Type,Pool Name ,Media(Tier1,Tier2,Tier3)
1, DT,POOLID1 ,"SSD","SAS 15K","SATA 7.2K"
Volume
Devn,Volser,CU,SSID,CCA,POOLID,TLv, Entry,Reloc
1101,VOL001,00,0000, 00, 1, 1, HIGH, Y
Operations to be performed in the next step
• Creating a disk configuration definition file
Related topics
• Creating a disk configuration definition file , page 62
• KTQRYDEV , page 97
• KTDEMO04 (Display the volume information) , page 183
Creating a disk configuration definition file
To create a disk configuration definition file, execute the KTSCAN command to scan the storage system,
and then execute the
KTSTORE
command to save the scan results.
Figure 21 Creating a disk configuration definition file
Prerequisites
• To define a tiering policy group by specifying an SMS storage group or volume serial numbers,
place the volumes online to allow the volume serial numbers to be detected.
To create a disk configuration definition file:
1. Specify the scan range, and then execute the KTSCAN command.
The command acquires disk configuration information, and stores it in the host-discovered array
structure and host-discovered array index structure.
Smart Manager for Mainframe operation 62