HP Color LaserJet CP1515n Printer - Manual (Page 56)

System setup menu
Use this menu to establish basic product settings. The System setup menu has several sub-menus.
Each is described in the following table.
Menu item Sub-menu item Sub-menu item Description
Language Select the language for the control-panel
display messages and the product
reports.
Paper setup Def. paper size Letter
A4
Legal
Select the size for printing internal
reports or any print job that does not
specify a size.
Def. paper type A list of available media
types appears. Select the media type for printing internal
reports or any print job that does not
specify a type.
tray 2 Paper size
Paper type
Select the default size and type for tray 2
from the list of available sizes and types.
Paper out action Wait forever
Override
Cancel
Select how the product should react
when a print job requires a size or type
that is not available or when a specified
tray is empty.
Select Wait forever to make the product
wait until you load the correct media and
press
OK . This is the default setting.
Select Override to print on a different
size or type after a specified delay.
Select Cancel to automatically cancel
the print job after a specified delay.
If you select either Override or Cancel,
the control panel prompts you to specify
the number of seconds to delay. Press
the
Right arrow ( ) button to increase
the time, up to 3600 seconds. Press the
Left arrow ( ) button to decrease the
time.
Print quality Calibrate color After power on
Calibrate now
Calibration mode
After power on: Select how soon the
product should calibrate after you turn it
on. The default setting is 15 minutes.
Calibrate now: Makes the product
perform a calibration immediately. If a job
is processing, the product calibrates after
the job is complete. If an error message
is displayed, you must clear the error
first.
46 Chapter 6 Control panel ENWW