HP Color LaserJet CP1515n Printer - Manual (Page 57)

Menu item Sub-menu item Sub-menu item Description
Calibration mode: Determines the type
of calibration that the product uses
during the calibration process.
● Normal: The standard Calibration
mode setting.
● Full: The extended Calibration
mode setting (this calibration takes
longer).
Replace supplies Override out
Stop at out
Override out: If the product determines
that a print cartridge is empty, you can
continue printing until you notice a
decrease in print quality.
Stop at out: If the product determines
that a print cartridge is empty, you must
replace the cartridge before printing can
continue. This is the default setting.
Cartridge low (1-20) The percentage threshold determines
when the product begins reporting low
toner. The message is either reported on
the control-panel display or using the
toner LED, if it exists. The default setting
is 10%.
Restrict color Enable color
Disable color
Select Enable color to allow the job to
print in either monochrome (black and
white) or color depending on the
specifications of the job.
Select Disable color to disable color
printing. All jobs will print in monochrome
(black and white).
Courier font Regular
Dark
Selects a version of the Courier font. The
default is Regular.
Display contrast Medium
Darker
Darkest
Lightest
Lighter
Select the level of contrast for the
display. The default setting is Medium.
ENWW Use the control-panel menus 47