HP Insight Control - Manual (Page 12)

Table 3-5 Typical RHEL and SLES file layout (continued)
Description File/Subfolder
Distribution files
dist\
Post-deployment scripts for configuration and software installation; as needed,
boot files for deployment
oem\
As needed, drivers required for deployment
drivers\
A small set of smart components required to make the target manageable
components\
Contains operating system specific updates, installed after operating system
installation.
updates\
Table 3-6 RHEL and SLES scripted install default settings
Default setting Component
The root password is password. This password is stored as clear text in the
kickstart/control file. HP recommends changing the default root password.
NOTE: Anonymous network users can access the kickstart file. HP recommends
changing the kickstart file password to the default, once the job is complete.
Root password
The disk space is portioned according to RHEL or SLES default specifications. RHEL
installs Logical Volume Manager (LVM) by default. Drive configuration
The Linux host name uses the console display name. Host name
Basic Linux server packages are installed. Packages
Firewall settings are disabled. Firewall
All NICs are enabled. SNMP is enabled. The default value of the SNMP community is
public. Networking
Virtualization Host features
These features enable you to deploy Hyper-V or ESX via a scripted install.
• The design of the Hyper-V features is very similar to Windows.
• The design of the ESX features is very similar to Linux.
• Imaging of virtualization hosts is not supported.
• The scripted install jobs include a system configuration task to enable processor virtualization
extensions.
Table 3-7 Hyper-V scripted install default settings
Default setting Component
The administrator password is password. Administrator password
A single partition is created automatically that expands to the full drive size. Drive configuration
The computer name uses the 15 right-most characters of the console display name. Computer name
Firewall settings are disabled. Firewall
Added to workgroup "WORKGROUP". SNMP and WMI are enabled. Networking
12 Reference