HP Integrity NonStop H-Series - Manual (Page 107)

LMM GUI Operations
Library Media Manager Installation and User’s Guide— 529970-002
6- 15
Media Labeling Tab
Figure 6-12 appears.
In this example, you can see that three tapes were selected to be labeled as
BACKUP: 000011, 000021, and 000022. See
Figure 6-10 on page 6-13. In
Figure 6-12 , notice on the right side of the dialog box that tape 000011 is being
labeled because it was the first tape selected. If you check the Queue Manager
Tab, you will see that the other two tapes are queued to be labeled. You can also
check the EMS Log Tab to view the event messages as they occur.
Figure 6-12. Initializing Volume Label
View the Status
of the current
operation
Tapes are
labeled
in the order
they were
selected