HP Integrity NonStop H-Series - Manual (Page 67)

Library Media Manager Installation and User’s Guide— 529970-002
4 -1
4
Configuring the LMM Client on the
NonStop System
This section contains:
Configuring the LMM Client on the NonStop
System
1. Log on as SUPER.SUPER. Then volume over to the location of the transferred
client files.
2. At the TACL prompt, type RUN CONFIG. Select and enter the password at the next
prompt to go any further with configuration. A Help menu displays the configuration
options.
Figure 4-1 shows the Configuration Menu.
Configuring the LMM Client on the
NonStop System 4-1