HP Integrity NonStop H-Series - Manual (Page 16)

Overview and System Requirements for Library
Media Manager (LMM)
Library Media Manager Installation and User’s Guide— 529970-002
1 -2
LMM Connection Configuration Overview
LMM Connection Configuration Overview
In order for the LMM software to control a tape library, a tape library control path must
be configured from a NonStop NS-series server to the tape library. The server controls
the movements of the tape library’s robotic arm.
HP NonStop NS-Series Servers
The tape library control path can be configured to run on a Fibre Channel ServerNet
adapter (FCSA) on a NonStop NS-series server.
If a CTL700 tape library has a SCSI interface, the control path will need to be
connected to an M8201 Fibre Channel to SCSI router before connecting to a FCSA on
a NonStop NS-series server.
For more information on the router, refer to the M8201 Fibre Channel to SCSI Router
Installation and User’s Guide.
Example:
SCF> ADD SCSI $CTL700, SENDTO STORAGE, PRIMARYLOCATION
(110,2,3), PRIMARYSAC 1, PRIMARYPORTNAME 100000E00D00F000,
LUN 0
Note. LUN in SCF should be 0 for the tape library that is on Bus 0. Lun in SCF should be 2 for
the tape library that is on Bus 1.
Note. PORTNAME in SCF corresponds to the WWP name of the router. This name is located
on the back of the device.