HP Integrity NonStop H-Series - Manual (Page 63)

Configuring the LMM Server on the NonStop System
Library Media Manager Installation and User’s Guide— 529970-002
3- 31
Verifying the Host Port Number
Verifying That the Host Port and EMS Messaging Numbers
are Established
Once the LMM GUI is connected, verify that both of the host port and host EMS
messaging port numbers are both in an established state (See
Figure 3-30 ):
1. At the TACL prompt, type “ SCF .”
2. Type “ STATUS PROCESS,TCP/IP PROCESS NAME> .”
3. Type EXIT.
Figure 3-30. Verifying the Host Port and EMS Messaging Numbers Established
Host Port and EMS
Messaging Number
Established