HP Surestore 64 Director Switch - Manual (Page 192)

176 Reset Configuration
C AUTION This operation will reset all director configuration data and non-volatile
settings to factory default values. All optional features will also be disabled.
The director must be offline to continue.
2. Set the director offline. For instructions, refer to Set Online State on page 168.
3. To continue the reset operation, click Reset button on the Reset Configuration dialog
box. If you want to cancel the operation, click Cancel.
Table 4 Data Default Values
Configuration Description Default
Identification Director Name NULL string
Director Description “Fibre Channel Director”
Director Contact “End User Contact (please configure)”
Director Location “End User Contact (please configure)”
Ports Port Names NULL strings
Port Blocked States Unblocked
Extended Distance (10-
100km) Disabled
LIN Alerts Disabled
Port Address Port number plus 4
Director Addressing IP Address 10.1.1.10 (E/OS 1.3 and above).
10.x.y.z, where x.y.z is a unique
number based on the MAC addres
(E/OS prior to 1.3)
Subnet Mask 255.0.0.0
Gateway Address 0.0.0.0
MAC Address PROM value