HP Surestore 64 Director Switch - Manual (Page 63)

Backing Up and Restoring Product Manager Data 47
Produ
ct M
a
na
ger
Ov
er
vie
w
QuikSync Settings
Do not change the default settings for automatic backup of the EfcData directory. If you
feel that QuikSync is not functioning properly, check the settings using the following steps:
1. Open the QuikSync dialog box using one of these steps.
– Click the Windows Start button and select Programs, then Iomega QuikSync->
QuikSync.
– Double-click the QuikSync icon on the Windows system bar in the lower right corner
of the Windows 2000 desktop.
– Right-click on the QuikSync icon and select Settings from the pop-up menu.
2. Verify that the dialog box is configured exactly as it displays in Figure 13.
Note The d:\EfcData\ directory is a mirrored directory of c:\EfcData\. Do not change
this location in the Source field.
3. Click the Advanced tab. The following displays:
Figure 15 Iomega QuikSync Dialog Box (Advanced Tab)