HP Photosmart 3110 All-in-One Printer - Manual (Page 100)

Print reports
You can set up your HP All-in-One to print error reports and confirmation reports
automatically for each fax you send and receive. You can also manually print system
reports as you need them; these reports provide useful system information about your
HP All-in-One.
For more information on the system reports you can generate, see the onscreen
HP Image Zone Help .
Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either
On
Fax Send or Send and Receive .
1. Press Setup .
2. Press 1 , and then press 2 .
This displays the Print Report menu and then selects Fax Confirmation .
3. Press to highlight one of the following, and then press OK .
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send and
Receive Prints a fax confirmation report for every fax you send and
receive.
Off Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
Print fax error reports
You can configure your HP All-in-One so that it automatically prints a report when
there is an error during transmission.
1.
Press Setup .
2. Press 1 , and then press 3 .
This displays the Print Report menu and then selects Fax Error Report .
3. Press to highlight one of the following, and then press OK .
On Fax Send Prints whenever there is a transmission error.
On Fax Receive Prints whenever there is a receiving error.
Send and
Receive Prints whenever there is any kind of fax error. This is the
default setting.
Off Does not print any fax error reports.
User Guide 97
Fax