HP Photosmart 3110 All-in-One Printer - Manual (Page 31)

both a USB and a Bluetooth ® connection to your HP All-in-One, install the
USB connection first. For more information, see the printed Setup Guide.
However, if you do not want a USB connection, select
Directly to the
computer on the Connection Type screen. Also, on the Connect Your
Device Now screen, select the check box next to If you are unable to
connect your device now... at the bottom of the screen.
2. Attach an HP Bluetooth ® adapter to the front USB port of the HP All-in-One.
3. Click the My Bluetooth Places icon on the desktop or in the taskbar.
4. Click View devices in range .
5. Once the available printers are discovered, double-click the name of the HP All-in-
One to finish the installation.
6. Print as you would to any printer.
Mac users
You can connect your HP All-in-One to a Mac that has Bluetooth ® built in, or you can
install an external Bluetooth ® adapter, such as an HP Bluetooth ® adapter.
To install and print using Bluetooth ® (Mac)
1. Make sure that you have installed the HP All-in-One software on the computer.
2. Attach an HP Bluetooth ® adapter to the front USB port of the HP All-in-One.
3. Press the On button on the control panel to turn the HP All-in-One off, and press
it again to turn the device on.
4. Attach a Bluetooth ® adapter to the computer and turn it on. Or, if your computer
has Bluetooth ® built in, just turn on your computer.
5. Open the Printer Setup Utility from the Applications:Utilities folder.
Note This utility is called the Printer Setup Utility on 10.3 and later. It is
called Print Center on 10.2.x.
6. From the pop-up menu, choose Bluetooth , then click Add .
The computer searches for the HP All-in-One.
7. In the printer list, select the HP All-in-One, then click Add .
The HP All-in-One is added to the printer list.
8. Print as you would to any printer.
Use printer sharing (Windows)
If your computer is on a network, and another computer on the network is connected
to the HP All-in-One by using a USB cable, you can use that device as your printer
using Windows printer sharing. The computer connected directly to the HP All-in-One
acts as the host for the printer and has full feature functionality. Other computers on
the network, which are referred to as clients, have access only to the print features. All
other functions must be performed on the host computer.
For more information on enabling Windows printer sharing, refer to the user guide that
came with your computer or the Windows onscreen Help.
Chapter 3
28 HP Photosmart 3100 All-in-One series
Finish
setup