HP Photosmart 3110 All-in-One Printer - Manual (Page 59)

Load an oversized original
To remove the lid
1.
Lift the lid to the open position, grasp the sides of the lid, and then gently pull the
lid upward until it stops.
2. Press the hinge releases until the lid separates from the rest of the HP All-in-One.
3. When you finish copying, scanning, or faxing, replace the list by inserting the tabs
on the hinge back into the appropriate slots.
You can copy, scan, or fax oversized originals by completely removing the lid from
your HP All-in-One. Your HP All-in-One functions normally with the lid removed.
Tip When you copy oversized originals, place the lid over the original. This
improves the quality of the copy and reduces ink use.
Choose papers for printing and copying
You can use many types and sizes of paper in your HP All-in-One. Review the
following recommendations to get the best printing and copying quality. Whenever you
change paper types or sizes, remember to change those settings.
Chapter 4
56 HP Photosmart 3100 All-in-One series
Load
originals
and
load
paper