HP Hitachi Dynamic Link Manager Software - Manual (Page 154)

3. Creating an HDLM Environment
130
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : off
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
Installing HDLM after an MSCS Installation:
To install MSCS and then HDLM:
1.
Install MSCS on the host.
2. Restart the host.
3. Log on to Windows as a member of the Administrators group.
4. Save the license key file directly under the Windows installation-destination
drive. Also, instead of using the license key file, you can directly specify a license
key during the installation of HDLM.
installation-drive
:\hdlm_license
The license key file will be deleted after the installation finishes.
5. Perform the installation.
• If you are not performing an unattended installation, insert the DVD into the
drive and run the installation program
setup.exe
.
The program checks whether HDLM has already been installed. If the
KAPL09173-W message will appear, perform the procedure shown in
3.5.5 Upgrade Installation or Re-installation of HDLM.
If a message does not appear, go to the next step.
• If you are planning to perform an unattended installation, execute the
installhdlm
utility.
drive-containing-the-inserted-installation-DVD
:\HDLM_Windows\DLMTo
ols\installhdlm -f
installation-information-settings-file