HP Hitachi Dynamic Link Manager Software - Manual (Page 378)

8. Messages
354
After confirming that the paths are not currently being reconfigured, click the
Refresh button.
KAPL02063-W
The version number cannot be displayed.
Details
The version number could not be acquired because an attempt to read a parameter
file, which starts up the HDLM GUI, failed.
Action
The version number cannot be displayed, but HDLM GUI operations can be
executed. If you want to display the version number, reinstall HDLM.
KAPL02064-W
The error monitoring interval and the number of times that the
error is to occur conflict with the automatic failback checking
interval.
Details
An intermittent error cannot be detected by using the values specified for the
following: the checking interval for automatic failbacks, the error-monitoring
interval, and the number of times the error needs to occur.
Action
Set the intermittent error-monitoring interval to a value that is equal to or greater
than (automatic-failback-checking-interval x
number-of-times-error-is-to-occur-for-intermittent-error-monitoring).
KAPL02065-W
The getting PathInformation has been stopped because the
configuration of paths was changed during the processing of the
getting PathInformation.
Details
Updated path information could not be acquired because the path configuration
was changed after an
Offline
,
Online
, or
Clear Data
operation was
performed.
Action
After confirming that the paths are not currently being reconfigured, click the
Refresh button.
KAPL02076-W
An attempt to acquire the HDLM version information failed.
Details =
aa...aa
Details