HP Hitachi Dynamic Link Manager Software User Manual
Page 214
4. HDLM Operation
190
8.
Restart node B.
(2) Checking an Added Path
You can add a path, by inserting a cable into an existing LU, even while the host (on
which HDLM is installed) is running.
When you add a path without adding an LU, what is displayed in the disk management
window does not changed.
You can confirm that a path has been added by using the HDLM command
view
operation, or the HDLM GUI. Figure 4-2: Using the command to confirm that a path
has been added shows an example of using the command to confirm that a path has
been added. For an example of how to use the HDLM GUI to confirm that a path has
been added, see the HDLM GUI Help.
Figure 4-2: Using the command to confirm that a path has been added
Note:
• The PathID is determined by the system choosing the smallest, available
number that is not already in use for another path. For example, when a path
is deleted, and then a new path is added, the PathID for the added path might
not be the same number as the deleted PathID.
• When a path not recognized by Windows is added to an LU for the first time,
the following messages might appear: