HP Insight Control Software for Linux - Manual (Page 13)

Table 1-1 Insight Control for Linux extensions to the HP Insight Control user interface (continued)
Documented in Description Menu item
Chapter 2 (page 25) The Define Networks tool provides an interface through
which the administrator can create and edit network
definitions that can be used by the Network
Configuration Editor
tool. The network definitions are
used by the OS installation tools to implement booting
using the virtual media mechanism.
IMPORTANT: The network definitions must be created
before initiating bare-metal discovery through virtual
media.
Options
→IC-Linux→Define
Networks
Chapter 2 (page 25) The Network Configuration Editor allows the
administrator to apply predefined network configuration
parameters to servers that will be booted using the
virtual
media mechanism.
NOTE: This tool can only be used for servers with
iLO -based management processors.
Options
→IC-Linux→Network
Configuration Editor
“Discovering bare-metal
servers using virtual
media” (page 39) This tool allows the administrator to initiate a bare-metal
discovery for servers using their already discovered
management processors. It is a single page that allows
the user to select the boot method of the server as either
PXE or virtual media, then boots the server using the
selected method to initiate a bare-metal discovery. Options
→IC-Linux→Initiate
Bare Metal Discovery
Section 13.4 (page 149) Removes Insight Control for Linux management agents
and associated files from selected managed systems. Deploy
→Deploy Drivers,
Firmware and
Agents
→IC-Linux→Uninstall
Agents...
Section 21.9 (page 209) Configures SNMP on LO100 based systems to provide
information so that the systems can be properly
identified by HP SIM. On iLO-based systems, this
information is provided by the Insight Control for
Linuxagents. Deploy
→Deploy Drivers,
Firmware and
Agents
→IC-Linux→Configure
SNMP on DL1xx Servers...
Section 21.1 (page 205) Changes the default management processor user name
and password or modifies the management processor
user name and password on selected target managed
systems. Configure
→Management
Processor
→Credentials...
Monitoring
Section 14.2 (page 152) Launches Nagios , a monitoring tool that displays and
generates alerts for all managed systems and services.
Tools
→Integrated
Consoles
→Nagios
Section 14.3.4 (page 161) Displays graphs about network bandwidth and other
system usage. Tools
→Integrated
Consoles
→Nagios→HP
Graph
Section 14.8 (page 168) Displays metric data in one-second intevals for servers
being monitored and managed by Insight Control for
Linux. Tools
→Integrated
Consoles
→Performance
Dashboard...
System management
Section 19.4.1 (page 199) Runs a user-specified Linux command through ssh on
one or more managed systems.
Tools
→Command Line
Tools
→Run SSH
Command...
Section 19.4.2 (page 200) Runs a Linux script from the Insight Control for Linux
repository on one or more managed systems.
Tools
→Command Line
Tools
→Run Script...
1.3 HP Insight Control for Linux extensions to HP SIM 13