HP Insight Control Software for Linux User Manual
Page 257
Corrective action
Cause/Symptom
Perform the appropriate action:
•
Verify that port 60002 is open on the CMS.
•
Invoke the Network Configure Editor and verify that
the network parameters for the server have been
specified correctly
For information on the Network Configure Editor,
see
“Using the Network Configuration Editor”
.
Virtual media bare metal discovery fails
Ensure that the HTTPS port on the CMS (the default value
is 60002) is properly specified in the /opt/mx/icle/
icle.properties
file and it open on the CMS.
See also the other corrective actions in this section.
Virtual media falls back to PXE boot.
If DHCP is configured in your environment and issues
arise when the server uses virtual media to boot, the server
might be booted using the PXE boot method instead.
23.27 Troubleshooting virtual media problems
257