HP NetStorage 6000 - Manual (Page 27)

Configuring Your System and Network
Network Settings
3-4
UNIX Settings
During initial setup, you must specify how to manage and maintain the
Hosts and Trusted Hosts files. Hosts file management lets you map a
machine name to its IP address. Trusted Hosts file management lets you
configure hosts on your network so that they have a trusted relationship
with the HP NetStorage 6000. A trusted relationship lets the host perform
administrative functions, such as file changes and remote network backup
(on the HP NetStorage 6000).
To add a Hosts file:
1 Using the NetStorage web interface, click the Configuration tab, then
select Network Settings > UNIX Settings.
2 Click Add next to the Hosts File Management field. The Add Host
File Entry screen appears.
3 Enter a Host Name and a Host IP Address.
4 If you are adding:
• multiple hosts, you need to click Apply after each addition, then click
OK when you finish.
• only one host, you can simply click OK.
To modify or delete an existing Hosts file:
1 Using the NetStorage web interface, click the Configuration tab, then
select Network Settings > UNIX Settings.
2 Select a host from the Hosts drop-down list.
3 Click either:
• Edit. Modify the Host Name and Host IP Address, then click
Apply.
• Remove. Click OK to confirm your selection.