HP NetStorage 6000 - Manual (Page 9)

Overview
Getting Started
1-2
2 Go directly to the Configuration Tab and manually enter:
• System name, see “DNS Settings” on page 3-3
• Administrative password, see “Administrative Password Settings” on
page 3-12
• DNS domain name, see “DNS Settings” on page 3-3
• Primary and secondary DNS server IP addresses, see “DNS Settings”
on page 3-3
• NIC parameters, see “TCP/IP Settings” on page 3-2
• Address for event log data, see “System Log” on page 3-9
• UNIX settings, see “UNIX Settings” on page 3-4
• WINS settings, see “Windows Settings” on page 3-6
• SMTP server information, see “SMTP/Email” on page 3-7
• SNMP settings/Traps, see “SNMP/Network Management Settings”
on page 3-8
• Contact and asset information, see “Informational Settings” on
page 3-10
• System time and date, see “Date and Time Settings” on page 3-11
• User mapping information, see “Mapping Strategy” on page 3-14
3 Go to the Storage Tab and manually:
• Group your physical drives into logical drives (RAID sets) if
required, see “Create a Logical Drive” on page 4-4
• Create volumes for data storage, see “Create a New File Volume” on
page 4-9
• Create directories and sub-directories beneath your volumes, see
“Create a Directory” on page 4-12
• Make volumes or directories available to users by sharing or
exporting them, see “Create or Edit Windows Shares” on page 4-14