Solve printer problems, The printer shuts down unexpectedly, Printhead alignment fails – HP Officejet Pro 8610 e-All-in-One Printer User Manual

Page 145: Paper-feed problems

Advertising
background image

Solve printer problems

This section contains the following topics:

The printer shuts down unexpectedly

Printhead alignment fails

Paper-feed problems

The printer cannot read the memory device

The printer shuts down unexpectedly

Check the power and power connections

Make sure the printer's power cord is connected firmly to a functioning power outlet.

Check the Schedule on and off feature

The printer's Schedule On and Off feature will turn off the printer at the time you set.

Check if you enable the Schedule On and Off feature. For more information, see Manage Power

on page 5.

Printhead alignment fails

If the alignment process fails, make sure you have loaded unused, plain white paper into the input

tray. If you have colored paper loaded in the input tray when you align the ink cartridges, the

alignment fails.

If the alignment process fails repeatedly and the print quality is poor, you might need to clean the

printhead. To clean the printhead, see Clean the printhead on page 155.

If cleaning the printhead does not solve the problem, contact HP support. Go to www.hp.com/support.

This website provides information and utilities that can help you correct many common printer

problems. If prompted, select your country/region, and then click Contact HP for information on calling

for technical support.

Paper-feed problems

TIP: You can visit the HP online support website at www.hp.com/support for information and utilities

that can help you correct many common printer problems.

Paper is not picked up from a tray

Make sure paper is loaded in the tray. For more information, see Load paper on page 23. Fan

the paper before loading.

Make sure the paper-width guides are set to the correct markings in the tray for the paper size

you are loading. Also make sure the paper guides are snug, but not tight, against the stack.

Make sure paper in the tray is not curled. Uncurl paper by bending it in the opposite direction of

the curl.

ENWW

Solve printer problems 129

Advertising