HP Officejet Pro 8610 e-All-in-One Printer - Manual (Page 90)

Set up speed-dial entries
You can set up frequently used fax numbers as speed-dial entries. This lets you dial those numbers
quickly by using the printer control panel.
TIP: In addition to creating and managing speed-dial entries from the printer control panel, you can
also use tools available on your computer, such as the HP software included with the printer and the
printer EWS. For more information, see Printer management tools on page 115.
● Set up and change speed-dial entries
● Set up and change group speed-dial entries
● Delete speed-dial entries
● Print a list of speed-dial entries
Set up and change speed-dial entries
You can store fax numbers as speed-dial entries.
To set up speed-dial entries
1. From the printer control panel display, touch and slide your finger across the screen and then
touch Setup.
2. Touch Fax Setup.
3. Touch Speed Dial Setup.
4. Touch Add/Edit Speed Dial, and then touch an unused entry number.
5. Type the fax number, and then touch Next.
NOTE: Be sure to include any pauses or other required numbers, such as an area code, an
access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
6. Type the name for the speed-dial entry, and then touch Done.
7. Touch OK.
To change speed-dial entries
1. From the printer control panel display, touch and slide your finger across the screen and then
touch Setup.
2. Touch Fax Setup.
3. Touch Speed Dial Setup.
4. Touch Add/Edit Speed Dial, and then touch the speed-dial entry you want to change.
5. If you want to change the fax number, type the new number, and then touch Next.
NOTE: Be sure to include any pauses or other required numbers, such as an area code, an
access code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
6. Type the name for the speed-dial entry, and then touch Done.
7. Touch OK.
74 Chapter 5 Fax ENWW