Case d: fax with, A distinctive ring service on – HP Officejet Pro 8610 e-All-in-One Printer User Manual

Page 203

Advertising
background image

NOTE: Some ISDN systems allow you to configure the ports for specific phone equipment. For

example, you might have assigned one port for telephone and Group 3 fax and another port for

multiple purposes. If you have problems when connected to the fax/phone port of your ISDN

converter, try using the port designated for multiple purposes; it might be labeled "multi-combi"

or something similar.

If you are using a PBX phone system, set the call waiting tone to "off."

NOTE: Many digital PBX systems include a call-waiting tone that is set to "on" by default. The

call waiting tone interferes with any fax transmission, and you cannot send or receive faxes with

the printer. Refer to the documentation that came with your PBX phone system for instructions

on how to turn off the call-waiting tone.

If you are using a PBX phone system, dial the number for an outside line before dialing the fax

number.

Make sure you use the supplied cord to connect from the telephone wall jack to the printer. If

you do not, you might not be able to fax successfully. This special phone cord is different from

the phone cords you might already have in your home or office. If the supplied phone cord is too

short, you can purchase a longer 2-wire phone cord from your local electronics store and extend

it.

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

If you encounter problems setting up the printer with optional equipment, contact your local service

provider or vendor for further assistance.

Case D: Fax with a distinctive ring service on the same line

If you subscribe to a distinctive ring service (through your telephone company) that allows you to

have multiple phone numbers on one phone line, each with a different ring pattern, set up the printer

as described in this section.

Figure B-3 Back view of the printer

1

Telephone wall jack

2

Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

ENWW

Set up faxing (parallel phone systems) 187

Advertising