Set up hp digital solutions, Set up hp digital filing, Set up scan to network folder – HP Officejet Pro 8610 e-All-in-One Printer User Manual
Page 30
●
Mozilla Thunderbird (Windows XP, Windows Vista, and Windows 7)
●
Qualcomm Eudora (version 7.0 and above) (Windows XP and Windows Vista)
●
Netscape (version 7.0) (Windows XP)
However, if your email application is not listed above, you can still set up and use Scan to Email and
Fax to Email if your email application meets the requirements listed in this section.
Set up HP Digital Solutions
You can set up HP Digital Solutions using the HP software provided with the printer—either using
software wizards that you can open from the HP printer software (Windows) or HP Utility (OS X).
TIP: You can also use the printer's EWS to set up the HP Digital Solutions. For more information
about using the EWS, see Embedded web server on page 118.
NOTE: If you are using the printer in an IPv6-only network environment, you must set up the digital
solutions using the EWS.
This section contains the following topics:
●
●
Set up HP Digital Filing
To set up HP Digital Filing, follow the appropriate instructions.
NOTE: You can also use these steps to change settings in the future.
This section contains the following topics:
●
●
Set up Scan to Network Folder
You can configure up to 10 destination folders for each printer.
NOTE: To use Scan to Network Folder, you must have created and configured the folder you are
using on a computer connected to the network. You cannot create a folder from the printer's control
panel. Also, make sure the folder preferences are set to provide read and write access. For more
information about creating folders on the network and setting folder preferences, see the
documentation for your operating system.
After you finish setting up Scan to Network Folder, the HP software automatically saves the
configurations to the printer.
To set up Scan to Network Folder, complete the following steps for your operating system.
To set up Scan to Network Folder from the printer software (Windows)
1.
Open the HP printer software. For more information, see Open the HP printer software
2.
Go to the Scan section under Print, Scan & Fax, and then double-click Scan to Network Folder
Wizard.
3.
Follow the on-screen instructions.
14 Chapter 2 Get started
ENWW