Perform duplexing – HP Officejet Pro 8000 - A809 User Manual
Page 30
Guidelines for printing on both sides of a page
•
Always use media that conforms to the device specifications. For more
information, see
Understand specifications for supported media
•
Specify duplex options in your application or in the printer driver.
•
Do not print on both sides of transparencies, envelopes, photo paper, glossy
media, or paper lighter than 16 lb bond (60 g/m
2
) or heavier than 28 lb bond (105 g/
m
2
). Jams might occur with these media types.
•
Several kinds of media require a specific orientation when you print on both sides
of a page, such as letterhead, preprinted paper, and paper with watermarks and
prepunched holes. When you print from a computer running Windows, the device
prints the first side of the media first. When you print from a computer using Mac
OS X, the device prints the second side first. Load the media with the front side
facing down.
•
For auto-duplexing, when printing finishes on one side of the media, the device
holds the media and pauses while the ink dries. Once the ink dries, the media is
pulled back into the device and the second side is printed. When printing is
complete, the media is dropped onto the output tray. Do not grab it before printing
is complete.
•
You can print on both sides of supported custom-sized media by turning the media
over and feeding it into the device again. For more information, see
specifications for supported media
Perform duplexing
NOTE: You can perform manual duplexing by first printing only the odd pages,
flipping the pages over, and then printing only the even pages.
To print automatically on both sides of a page (Windows)
1. Load the appropriate media. For more information, see
.
2. Make sure the duplexer is properly installed. For more information, see
3. With a document open, click Print on the File menu, and then select a printing
shortcut.
4. Change any other settings, and then click OK.
5. Print your document.
To print automatically on both sides of a page (Mac OS X)
1. Load the appropriate media. For more information, see
.
2. Make sure the duplexer is properly installed. For more information, see
3. Verify that you are using the correct printer and page size in the Page Setup.
4. On the File menu, click Print.
5. Select Copies and Pages from the drop-down list.
6. Select the Two-sided Printing option.
Chapter 3
26
Use the device