HP OneView for VMware vCenter - Manual (Page 70)

•
VMware Disk Identifier—Disk name assigned by VMware
•
Path ID—Path ID assigned by VMware
•
Array Disk RAID—RAID level of the array disk
•
Array Disk Total Capacity—Array disk capacity (in GB)
•
Array Disk Allocated Capacity—Capacity allocated by the storage system. For a thin-provisioned
disk, this value might differ from the Array Disk Total Capacity value.
•
Array Disk Provisioned—Specifies whether the disk is thin provisioned or normal (not supported
on HP MSA)
•
Array Disk Type—Array disk type
•
Storage Pool
HP StoreVirtual—Name of the cluster. ◦
◦ HP 3PAR StoreServ—Disk group where the vdisk is located.
◦ HP EVA—Disk group where the vdisk is located.
This value is displayed only when demand allocated snapshots are used. For other volume
types, no value is displayed.
◦ HP MSA—Name of the vdisk or snap pool where the volume is located.
◦ HP XP P9000/HP XP—Disk group or storage pool used for allocating storage to the disk.
This might be a P9000 or XP thin provisioning pool, a P9000 or XP Snapshot pool, an
internal parity group, or an external group.
◦ HP StoreOnce Backup—Not applicable
•
Storage Pool Available Capacity
HP StoreVirtual—Unallocated space in the storage pool (cluster) that can be used to meet
storage needs for a snapshot or thin-provisioned volume. The calculation of this value ◦
assumes all unallocated space is formatted the same as this volume. For all other volume
types, no value is displayed.
◦ HP 3PAR StoreServ—Unallocated space in the storage pool that can be used to meet
storage needs for a snapshot or thin-provisioned volume. For all other volume types, no
value is displayed. The calculation of this value assumes that all disk space uses the same
RAID type as this volume.
◦ HP EVA—Unallocated space in the storage pool that can be used to meet storage needs
for a snapshot or thin-provisioned volume. For all other volume types, no value is displayed.
The calculation of this value assumes that all disk space uses the same RAID type as this
volume.
◦ HP MSA—Unallocated space in the storage pool (cluster) that can be used to meet storage
needs for a snapshot or thin-provisioned volume. The calculation of this value assumes
all unallocated space is formatted the same as this volume. For all other volume types,
no value is displayed.
◦ HP XP P9000/HP XP—P9000 or XP thin provisioning pool capacity.
◦ HP StoreOnce Backup—Not applicable
•
Storage Pool Domain Name—Domain name assigned to CPG (applies only to HP 3PAR
StoreServ)
•
Copy Pool Name—Assigned Copy CPG (applies only to HP 3PAR StoreServ)
70 Using Insight Control for vCenter