HP OneView for VMware vCenter - Manual (Page 78)

•
Host HBA Port WWN
HP StoreVirtual—IQN assigned to the host ◦
◦ HP 3PAR StoreServ (FC)—WWN for the host port on the host end of this path
◦ HP 3PAR StoreServ (iSCSI)—IQN assigned to the host
◦ HP EVA—WWN for the host port on the host end of this path
◦ HP MSA (FC, SAS)—WWN for the host port on the host end of this path
◦ HP MSA (iSCSI)—IQN assigned to the host
◦ HP XP P9000/HP XP—WWN for the host port on the host end of this path
◦ HP StoreOnce Backup—Not applicable
•
Array Port WWN
HP StoreVirtual—IQN used by the host for connecting to this disk on this storage array ◦
◦ HP 3PAR StoreServ (FC)—WWN for the storage array port on the storage array end of
this path
◦ HP 3PAR StoreServ (iSCSI)—IQN used by the host for connecting to this disk on this
storage array
◦ HP EVA—WWN for the storage array port on the storage array end of this path
◦ HP MSA (FC, SAS)—WWN for the storage array port on the storage array end of this
path
◦ HP MSA (iSCSI)—IQN used by the host for connecting to this disk on this storage array
◦
HP XP P9000/HP XP—WWN for the storage array port on the storage array end of this
path
◦ HP StoreOnce Backup—Not applicable
•
LUN Number—LUN used for presenting the storage disk from the storage array port to the
host HBA port
•
Path ID—Path ID assigned by VMware
•
Preferred Path
HP StoreVirtual—Not applicable ◦
◦ HP 3PAR StoreServ—Not applicable
◦ HP EVA—Specifies whether the path uses a port on the controller that is configured as
the preferred path for the vdisk (Yes, No, No preference)
◦ HP MSA—Not applicable
◦ HP XP P9000/HP XP—Not applicable
◦ HP StoreOnce Backup—Not applicable
•
Active Path—Specifies whether the path is active or in standby status
78 Using Insight Control for vCenter