HP OneView for VMware vCenter - Manual (Page 77)

•
Array Disk Total Capacity—Total amount of storage available to the datastore
•
Array Disk Allocated Capacity—Size of the virtual disk on the array
•
Array Disk Provisioned—Whether the virtual disk uses thick or thin provisioning
•
Array Controller—Controller used for this path
•
Array Port—Storage array's port identifier used for this path
•
Host Group
HP StoreVirtual—Name configured for the host's IQN in the management console ◦
◦ HP 3PAR StoreServ—Name of the host object containing the host WWN for this path
◦ HP EVA—Name of the host object containing the host WWN for this path
◦ HP MSA—Nickname of the host with the host WWN for this path
◦ HP XP P9000/HP XP—Name of the host group containing the HBA WWN on the array
port for this path
◦ HP StoreOnce Backup—Not applicable
•
Host Access
HP StoreVirtual—Host access level assigned to the presentation of the disk to the host (for
example, READ/WRITE or READ-ONLY) ◦
◦ HP 3PAR StoreServ—N/A. 3PAR storage volumes operate in a read-only/read-write
configuration.
◦
HP EVA—Host access level assigned to the presentation of the disk to the host (for example,
READ/WRITE or READ-ONLY)
◦ HP MSA—Access setting for volume mapping (for example, READ/WRITE or READ-ONLY)
◦ HP XP P9000/HP XP—Host access level assigned to the volume
NOTE: The HP XP P9000/HP XP array does not allow host access to be specified on
a per-host or per-path basis.
◦ HP StoreOnce Backup—Not applicable
•
Host Mode
HP StoreVirtual—Not applicable ◦
◦ HP 3PAR StoreServ—Not applicable
◦ HP EVA—Host mode assigned to the HP EVA host object
◦ HP MSA—Name of the host's profile
◦ HP XP P9000/HP XP—Host mode assigned to the host group
◦ HP StoreOnce Backup—Not applicable
•
Host Name—Host name
•
Current Owner—Specifies whether the host is the current owner of the selected VM
Using the Storage Module for vCenter 77