HP OneView for VMware vCenter - Manual (Page 73)

◦ HP MSA (iSCSI)—IQN used by the host for connecting to this disk on this storage array
◦ HP XP P9000/HP XP—WWN for the storage array port on the storage array end of this
path
◦ HP StoreOnce Backup—Not applicable
•
LUN—LUN used for presenting the storage disk from the storage array port to the host HBA
port
•
Host—Host that is currently running the selected VM
•
Array Type—HP array type
•
Array Controller—Controller used for this path
•
Array Port—Storage array's port identifier used for this path
HP StoreVirtual—Not applicable ◦
◦ HP 3PAR StoreServ—Port WWN of the controller node
◦ HP EVA—Port name configured in HP EVA Command View
◦ HP MSA—Port on the array controller used for this path
◦ HP XP P9000/HP XP—Port number
◦ HP StoreOnce Backup—Not applicable
•
Host Group
HP StoreVirtual—Name configured for the host's IQN in the management console ◦
◦ HP 3PAR StoreServ—Name of the host object containing the host WWN for this path
◦ HP EVA—Name of the host object containing the host WWN for this path
◦ HP MSA—Nickname of the host with the host WWN for this path
◦ HP XP P9000/HP XP—Name of the host group containing the HBA WWN on the array
port for this path
◦ HP StoreOnce Backup—Not applicable
•
Host Access
HP StoreVirtual—Host access level assigned to the presentation of the disk to the host (for
example, READ/WRITE or READ-ONLY) ◦
◦ HP 3PAR StoreServ—N/A. 3PAR storage volumes operate in a read-only/read-write
configuration.
◦ HP EVA—Host access level assigned to the presentation of the disk to the host (for example,
READ/WRITE or READ-ONLY)
◦ HP MSA—Access setting for volume mapping (for example, READ/WRITE or READ-ONLY)
◦ HP XP P9000/HP XP—Host access level assigned to the volume
NOTE: The HP XP P9000/HP XP array does not allow host access to be specified on
a per-host or per-path basis.
◦ HP StoreOnce Backup—Not applicable
Using the Storage Module for vCenter 73