HP OneView for VMware vCenter - Manual (Page 71)

•
Array Disk Emulation Type (HP XP P9000 and HP XP arrays only)—LDEV emulation type.
•
Replicated—Specifies whether the disk is replicated
•
Physical Device Type—The type of device in the CPG (applies only to HP 3PAR StoreServ).
The types can be FC, NL, or SSD.
•
Zero Detection—Detect and discard zeros during volume copying (applies only to HP 3PAR
StoreServ)
•
Volume ID—Internal volume ID (applies only to HP 3PAR StoreServ)
•
Volume Status—Volume health status (applies only to HP 3PAR StoreServ)
•
Drive Speed—Physical drive speed (applies only to HP 3PAR StoreServ)
•
Creation Time—Source volume creation time (applies only to HP 3PAR StoreServ)
•
Expiration Time—Source volume expiration time (applies only to HP 3PAR StoreServ)
•
Retention Time—Source volume retention time (applies only to HP 3PAR StoreServ)
•
User Space Warning—Alert threshold for a volume's User CPG (applies only to HP 3PAR
StoreServ)
•
User Space Limit—Write failure threshold for a volume's User CPG (applies only to HP 3PAR
StoreServ)
•
Copy Space Warning—Alert threshold for a volume's Copy CPG (applies only to HP 3PAR
StoreServ)
•
Copy Space Limit—Write failure threshold for a volume's Copy CPG (applies only to HP 3PAR
StoreServ)
Viewing virtual disks
The virtual disks page displays the following information:
•
Virtual Disk Name—Virtual disk name assigned by VMware
•
Virtual Disk Type—Virtual disk type (VMDK or RDM)
•
Virtual Machine—Name of the VM associated with the selected VMDK or RDM
•
Datastore—Datastore name or the .vmdk name for the RDM
•
Provisioned Capacity—Disk capacity visible to a VM using this VMDK or RDM
•
Allocated Capacity—Disk capacity reserved by VMware for the VMDK or RDM
For an RDM, this value will match the provisioned capacity value. For a VMDK, this value
might be less than the provisioned capacity value if VMware thin provisioning is used. This
is separate from thin provisioning configured in the storage array.
•
VMware Provisioned—Thick or thin
Viewing HBAs
The HBAs page displays the following information:
•
Host Names—Host name or cluster host names
•
Type—HBA type
•
VMware Device Identifier—HBA identifier assigned by VMware
•
WWN/IQN—HBA WWN
NOTE: HBA WWN address is not available for HP MSA SAS arrays.
•
Label—HBA identifier assigned by VMware
Using the Storage Module for vCenter 71