HP StorageWorks 2.140 Director Switch - Manual (Page 56)

Monitoring and managing the director 56
Displaying director information
Double-click the director illustration, away from a hardware component, to display the Director
Properties dialog box ( Figure 15 ).
Figure 15 Director Properties dialog box
The following information is displayed in this dialog box:
• Name—Director name.
• Description—Director description.
• Location—Director location.
• Contact—Personnel to contact.
• World Wide Name—Fibre Channel World Wide Name (WWN) identifier for the switch.
• Type Number—Director type number.
• Model Number—Product model number.
• Manufacturer—Product manufacturer.
• Serial Number—Product serial number.
• EC Level—Engineering change (EC) level.
• Firmware Level—Firmware version number.
• Management Style—Always set to the Open Systems management style.
• Preferred Domain ID— As set through the Configure Switch Parameters dialog box.
• Active Domain ID—The actual domain ID assigned to the switch.
• FC address Domain—The director’s Fibre Channel address (hexadecimal).
• CTP State—Displays either Active or Failed.
• Director Speed—For the Director 2/140 model, this is always
2 Gig
. For the Director 2/64
model, this speed is configured through the Configure Switch Parameters dialog box and can be
either
1 Gig
or
2 Gig
.