HP StorageWorks 2.140 Director Switch User Manual
Page 76
Monitoring and managing the director
76
The Node Properties dialog box contains the following options:
•
Port Number—The physical port number on the director to which the node is connected.
•
Fibre Channel Address—In Open Systems style only, this displays the three-byte Fibre Channel
Address of the node.
•
Port Address—In FICON Management Style only, this displays the logical address (hexadecimal
number) for the port where the node is attached.
•
Port WWN—Port World Wide Name of the attached device.
•
Port Nickname—Nickname for the port WWN. Must be configured to display.
•
Node WWN—Node World Wide Name of the attached device. Must be configured to display.
•
Node Nickname—Nickname for the node WWN.
•
Unit Type—See the “Unit Type” bullet on page 73 for a description.
•
Buffer-to-Buffer Credit—The buffer-to-buffer credit that the attached node has available.
•
Class of Service—Class of service. This can be Class 2, Class 3, or both.
•
Data Field Size—Data field size. This is the largest size of Fibre Channel frame the node will
process. The size is negotiated with the attached device.
•
Type—Type number.
•
Model—Model number.
•
Sequence #—Sequence number.
•
Tag—tag number.