HP StorageWorks 2.32 SAN Switch - Manual (Page 180)

Switch View
4–24 Web Tools Version 3.0.x/4.0.x User Guide
Element Configuration Tab
The Element Configuration tab of the Fabric Watch > Threshold Config window is
shown in Figure 4–14.
Figure 4–14: Element Configuration tab of the Threshold Configuration window
Table 4–8 describes the fields available in the Element Thresholds tab.
Table 4–8: Element Thresholds Tab Fields
Select Element Select the element of interest from the drop-down menu.
Status
Enable/Disable Select appropriate radio button to Enable or Disable the
status of the selected element.
Behavior Type
Trigger/Continuous Select the appropriate radio button to select a behavior
mode.
In Triggered Behavior mode, Fabric Watch only registers
an event when a variable exceeds a threshold. An event
will not be triggered again until the variable falls and
exceeds the threshold again.
In Continuous mode, Fabric Watch registers an event
when a variable exceeds a threshold and continues to
register an event for every time interval.