HP StorageWorks 2.32 SAN Switch - Manual (Page 228)

Switch View
4–72 Web Tools Version 3.0.x/4.0.x User Guide
Table 4–19 contains a description of the fields on the SNMP tab.
Table 4–19: SNMP Tab Fields
Name Displays or sets contact information for switch. Default is
Field Support.
Location Displays or sets the location of switch. Default is End User
Premise.
Description Displays or sets system description. Default is Fibre
Channel Switch.
Trap Level Sets severity level of switch events that prompt SNMP
traps. Default is 0.
Enable
Authentication Trap Check to enable authentication traps; uncheck to disable
(recommended).
Community And Trap Recipient Configuration
Community String Displays the community strings that are available to use. A
community refers to a relationship between a group of
SNMP managers and an SNMP agent, in which
authentication, access control, and proxy characteristics
are defined. A maximum of six community strings can be
saved to the switch.
Recipient Displays the IP address of the Trap Recipient. A trap
recipient receives the message sent by an SNMP agent to
inform the SNMP management station of a critical error.
Access Control List Displays the Read/Write access of a particular community
string. Read only access means that a member of a
community string has the right to view, but cannot make
changes. Read/Write access means that a member of a
community string can both view and make changes.
Access Control List Configuration
Access Host Displays the IP address of the host of the access list.
Access Control List Displays the Read/Write access of a particular access list.
Read only access means that a member of an access list
has the right to view, but cannot make changes.
Read/Write access means that a member of an access list
can both view and make changes.
OK Click to save the changes made to the tab and to exit the
tab.